 |
 Technocon Engineers,
India
>>Request a price quote |
|
|
Technocon Engineers,
India
>> Request a price quote |
| Home | Sizes | Grades (AFBMA) | Applications | Grinding Media | Burnishing Media | Chrome Steel Balls | Stainless Ball |
|
Technocon
Engineers manufacture high carbon steel balls, fully
hardened. ■ Steel Material: High Carbon Steel SAE / AISI 1085, 1080, 1065, 1060, C85, C80, C65, C60. Details... ■ Sizes (Diameters): 2 mm to 12.7 mm and 5/64" to 1/2" diameter. Details... ■ Grades AFBMA (Tolerances): 100 to 2000. Details... ■ Production sequence of carbon steel ball. ■ Advantages of Technocon's carbon steel balls. |
Applications of high carbon steel
balls, thorough hardened. Some common uses of carbon steel balls are as: Ball burnishing vibro finish steel media, Details... Bicycle balls and inexpensive anti-friction bearings, Details... Grinding and milling ball mill media and balls, Details... Agitators in paint spray cans, In drawer slides, casters, roller skates, weights, conveyors, overhead trolleys, door locks. Details... |
 High Carbon Steel Balls SAE / AISI 1060, 1065, 1080, 1085, C60, C65, C80, C85 Thorough Hardened to 58 - 63 HRc. |
|
Properties ● Corrosion Resistance: Stainless Steel > Chrome Alloy Steel > High Carbon Steel.
●
Hardenability:
The above
high carbon steel are hardenable by heat
treatment upto the core. These
are generally through hardened upto 58-63 HRC (Rockwell C). ● Magnetism: These are fully magnetic. ●
Passivation:
Carbon steel balls are prone to atmospheric oxidation and
rusting in corrosive or humid environment. |
Advantages For better performance and life in most of the above applications we manufacture steel ball (round / spherical) in high carbon steel (carbon upto 0.85%) instead of low or medium carbon steel. They are thorough hardened (upto the core) to 58-63 HRc instead of just case hardened or carburized. Such high carbon steel balls have better wear and load resistance than low or medium carbon steel balls. Technocon offers hardened upto the core, high carbon steel ball in AISI 1085, 1080, 1065, 1060, C85, C80, C65, C60 carbon steels. Carbon steel balls provide substantial cost savings for many applications. They also prove to be an inexpensive option for trial runs and pilot lots. |
| Material Composition of High Carbon Steel Ball (By Percentage) |
| Carbon C |
Manganese Mn |
Silicon Si |
Phosphorus P |
Sulphur S |
Nickel Ni |
Chromium Cr |
Hardness Rockwell C |
|
| AISI 1085/ C85 | 0.75-0.95 | 1.00 max | 0.35 max | 0.040 max | 0.050 max | Nil | Nil | 58-63 HRc |
| AISI 1080/ C80 | 0.70-0.90 | 1.00 max | 0.35 max | 0.040 max | 0.050 max | Nil | Nil | 58-63 HRc |
| AISI 1065/ C65 | 0.60-0.70 | 1.00 max | 0.35 max | 0.040 max | 0.050 max | Nil | Nil | 58-63 HRc |
| AISI 1060/ C60 | 0.55-0.65 | 1.00 max | 0.35 max | 0.040 max | 0.050 max | Nil | Nil | 58-63 HRc |
|
|
Technocon
Engineers,
India Request a price quote |
Go Top |
| www.steelmedia.com |
© Technocon Engineers (India). All rights reserved. No part of this site may be reproduced without permission. |